Qualink ADSS cable is loose tube stranded. Fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compct and circular cable core. After the cable core is filled with filling compound, it is covered with a thin polyethylene (PE) inner sheath. After two layers of Aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with PE or Anti-tracking (AT) outer sheath. Qualink ensures product quality and technology design by passing all the testrequirement for superior data transmission.
Features:
Optimized for fiber counts up to 48 fibers for extremely cost effective solution
The maximum inductive at the operating point can reach 25kV
Light weight and small diameter reducing the load caused by wind.
Large span lengths and the largest span is over 1000 m.
Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and temperature
Excellent attenuation & bandwidth performance
Waterblock gel for moisture protection
Polyethylene jacket for weather and UV protection
Small diameter, light weight, quick and easy fiber access with standard tooling
Faster cable preparation and termination
Compliant with IEC 60332-1, IEC 60574-1/2 and IEEE 383 standards
Fiber color code according to IEC 304 and TIA/EIA 598-A standards
20 years warranty life time *
* 20 years warranty life time subject to installed and used in proper environment.
1 Online 
