LANmark-OF snap-in adapters have been designed for snapping into the modular OF patch panels and ZD boxes. They are available in single SC, dual SC, LC duplex and MT-RJ version. The 2 Small Form Factor connector types offer double density, as two fiber connections are offered on the SC-type footprint. Installation time is saved as the snap-in concept replaces the time-consuming screwing attachment of coupling devices.
Materials
- Adapter Housing: PBT, 15% Glass
- Sleeve Holder: PBT, 20% Glass
- Dust Cap: PP
- Spring:SUS 304 CSP 3/4 H
- PB Sleeve: PB - inner diameter 2,48mm - length 11.4mm
- Phosphor Bronze Sleeve: ZA Ceramic - inner diam.: 2.48mm - length 11.4mm
Technical Specifications
Insertion Loss: Max 0.5 - typical 0.1 or better
Durability: < 0.02 dB deviation after 1000 matings
< 0.02 dB after temperature cycle test
Sleeve Preservation Strength: 2.0 ~ 5.9N (200gf ~600gf)
JIS Z9015 standard l: 1 time pull out
NAMl test AQL = 0.25%
Plug Connect/Disconnect Strength: Less than 19.6N (2Kgf)
Sealing Pull Strength: Less than 98.0N (10Kgf)
Plug Removal Strength: Less than 68.6N (7Kgf) |
1 Online 
